Wrong maximum charging speed for FIAT 2020 Hatchback (24 kWh)
- Done
|
G |
George Schmitz |
During a route planning, with CCS loaders selected, NO22 kW slow loaders, the calculated load times are much too high. For me, it seem's to only use Level 2 loading with 11 kW for the calculation. But this specific car model can use CCS with up to 50 kW.
If i switch in the same route planning to the car with bigger battery (FIAT 2020 Hatchback 42 kWh) (which can use CCS up to 85 kW), the planning is OK. (So, no wrong selections by myself)
Example:
For 531 Km:
Small battery: 92,5 kWh loaded, 6 loads, 11:45 h load time!!!
Bigger battery: 124,5 kWh loaded, 6 loads, 1:37 load time!
Probably something wrong in the device database? Would be nice if we can see what load specs are pre-defined for a car.
Activity Newest / Oldest
Johan Hellmark
Status changed to: Done
Katya_ABRP
Status changed to: In progress
George Schmitz
Hello, as requested, the planning & link to it. Not exact the same route (because of privacy issue), but same issue: (547 km distance, 6 loads, 14 h 31 load time)
abetterrouteplanner.com/?plan_uuid=430ccc7e-8c5b-4960-8f87-d9c329005cbe
You can see, at the 1 load place, 12.8 kWh in 2h 2min. Available chargers: 300 kW CCS at this location.
Same route, just the other Fiat with slightly larger battery/CSS:
1 load (same location): 25 kWh in 27 min
abetterrouteplanner.com/?plan_uuid=a39b13f5-3b70-4adf-bfdc-3a7874dadf66
Kind regards, George
Katya_ABRP
Thank you! We'll be looking into it!
Katya_ABRP
Status changed to: User Feedback
Katya_ABRP
Hi George,
Please share a link to the plan where this occurs. You can generate a shareable link by clicking: share > share ABRP link
/Katya
Katya_ABRP
Status changed to: Investigate