Voters 6
-
-
-
J
-
-
-
6
Planned and live starting SOCs differs
- Done
 |
Jesús Ruipérez |
Planned and live starting SOCs differs. See attached captures. It seems a rounding problem.
ABRP 4.2.9 (1039).
Vlink MC+
Activity Newest / Oldest
Samuel_ABRP
Status changed to: Done
Samuel_ABRP
This is now fixed and will be available in the next version (4.2.11).
MrHansenTwiit
Incorrect live SOC mapping in detailed view. See screen shot. Hope you can help fix this. It use to work fine with old OBD.
Samuel_ABRP
Merged with: Incorrect live SOC mapping in detailed view
Samuel_ABRP
I could reproduce this and I'm working on a fix.
JoeW
Hello everybody.
I still can't figure out the diagrams.
Can someone explain the attached diagram to me?
What do the two lines mean?
On other trips, the point always runs relatively close to the blue line. Up until now I always thought that the blue line was the one initially calculated and the dashed line shows the actual course to date and the further course predicted from it. If that were the case, the point would always have to lie on the dashed line. In addition, the two lines must then be the same at the beginning and then possibly diverge more and more.
The soc-datas are delivered by a obd-dongle
I'm confused!
I would be very grateful for clarification
Many greetings
Joe
Samuel_ABRP
Merged with: Meaning of lines in diagram
Samuel_ABRP
Status changed to: In progress
Samuel_ABRP
Hi,
this is a bug we have in our UI. The green line is scaled wrongly and results in a different line than the blue line. We are already working on a fix for that.
TomTomZoe
I also have the “green line is not correct drawn issue”, I think since ABRP V4.2.9
Samuel_ABRP
Status changed to: User Feedback
Samuel_ABRP
It shows 76% on both images, 74% is the arrival soc. Or am I missing something here?
Jesús Ruipérez
I mean that there is a relevant gap between the initial levels of SOC (Planned and Live). I attach another example.
In both cases, I planned/calculated the trip immediately before starting it, so I think both SOC values should be the same.
Jesús Ruipérez
(see previous comment)
Samuel_ABRP
Second image is a bug that has been reported and we are already looking into. As you can see the green line is just drawn at the wrong position, but the green soc point is at the right position at 76%.
Samuel_ABRP
1st image:
Before you calculated the plan did you connect to OBD? Because it could be that you calculated with a slightly older value and the soc dropped a bit after that and it only got the real value after planning.
Jesús Ruipérez
Tnks!. I'll test again both cases with next version and If any problem arise I will inform.
Samuel_ABRP
Hi, we did not fix the green line issue from your second image yet, but it is on our top priority list. I'll let you now when it is fixed.
However you could still try if the first one is related to outdated soc, by connecting to the car first, and then planning and checking the green line. If then you still see that the blue and green line diverge right from the start, please let me know.