2
OBDLink CX says "cannot connect using BLE".
- User Feedback
- Subscribe
|
C |
Craig Huegen |
It sees the device, starts counting down from 30s but by time it gets to 23s or so, it errors and stops.
Activity Newest / Oldest
Craig Huegen
I did review the FAQ but didn't see that section. An upgrade to the latest version and live data is now available! Thanks! All good now.
Katya_ABRP
Status changed to: User Feedback
Katya_ABRP
Hi Craig,
Have you checked the following points in our FAQ?
www.iternio.com/faq?questionId=184bd54c-56cf-4c04-866d-9fcefba7b70f&appDefId=14c92d28-031e-7910-c9a8-a670011e062d
/Katya
Linda
Status changed to: Investigate