1
Manual reference consumption still not used
- Open
- Subscribe
|
G |
gergy verjux |
Version 5.0.8 (web and android)
I am using Live SOC but I want to use a manually entered reference consumption, but it's not taken into account (using 100 and 150, live reference is 165)
Activity Newest / Oldest
TomTomZoe
ABRP V5.0.8 (3006)
iPad mini 5 iPadOS 17.5.1
I‘m using iOS where it works fine.
Do you use the Android Version?
The first screenshot shows using a manual reference consumption of 400 Wh/km. The second one shows the same route using the automatic reference consumption which is 180 Wh/km at the moment. Both with iOS version.
gergy verjux
Yes, Android version, as stated. Same issue on the web version.
TomTomZoe
After changing the reference consumption, you must have had the plan recalculated ("recalculer" in french, „restart“ in english)?
TomTomZoe
I just tried the webversion of ABRP (V5.0.8 (3006)) which also uses the manual reference consumption in a correct way for me.
gergy verjux
Yes, of course, otherwise the screenshot would show the Planning button, not the Drive button :-)
gergy verjux
Another information: if the manually entered value is above the live reference (ie 170 for a live reference of 165), then it is taken into account.
TomTomZoe
I tried to use the lowest possible value (100 Wh/km) and also 150 Wh/km.
Both plans are calculated with the corresponding values, having different energy consumption, so no error at me.