The obd link is made but correct data can not be read by app. Car is on and dongle is mce200.
i just added a small fix to the ipace obd commands, could you please check if the connection works now? To be safe please follow the setup procedure again. Let me know if it works.
The changes you did looks to have solved the problem at least for me.It now correctly gets the data from Ipace 2019 via OBD. Thanks a lot for the fix.
2019 ipace should definitely work, we have many users already that connected their 2019 ipace, so please just try it again a few times. Make sure no other app uses the BT dongle during that time. Eventually it should work.
As for Guido, i think you have the 2022 ipace, so there might be a different issue with not supported PIDs, will come back to you in that other issue.
Just to make sure that we do not miss anything please do the following:
Unlink telemetry and set it up again. If it fails, send debug data and let me know the time you sent it, so i can look it up and check if i can see anything in the logs.
We're sorry to hear! Please add the following details to your report to help us troubleshoot this;
1. ABRP app version number (can be found at bottom of settings in app)
2. Model of OBD Dongle
3. Has the connection previously been established successfully?
ABRP VERSION 4.2 0(831)
OBD dongle: MCE 200
no never worked previous version fail on step 2 this now pass but then fail step 3.
Hi Ge Ve,
Please make sure the car is powered on when you try to connect. Sometimes you have to repeat the step once or twice. But we have some Ipace 2019 connected already, so in general it should work.