J |
Jay Mahler |
I have my Polestar 2 defined as starting at 100% charge, but the route planner always assumes an 80% SOC. If you won't take the defined starting charge, at least let us set the starting charge in the planned route.
Activity Newest / Oldest
Linda
Status changed to: User Feedback
Linda
Hi Jay
You have set the starting SoC to 80% in the plan. Remove that and you will start with 100%.
Jay Mahler
Thanks, that worked. I consider myself a very experienced and competent computer user, and I tried different ways to get that SoC changed. Why doesn't Restart pick up the default value? Why doesn't changing Waypoints followed by Plan pick up the default value? It didn't occur to me that I had to Clear the plan and start over.
TomTomZoe
Hi Jay,
Correct, you have not only to press restart, but also to click on clear.
The calculated plan with charging stops is based on the requirements of the user (start, destination, waypoints, manual changes).
By clicking on reset, the plan with charging stops is reduced again to the requirements of the user (including the manual changes).
Is it possible, that you’ve defined your home location as a favorite location with charging possibility?