0
Falla la conexión con el ODB
- Closed
- Subscribe
|
J |
Jose Antonio Garcia Fernandez |
La conexión con el ODB se establece correctamente, pero en mitad de la conducción el SOC toma valores distintos a los reales y de esta manera no se puede utilizar.
Peugeot e2008
Vgate iCar Pro BLE 4.0
Xiaomi redmi 7A
Android 12
Activity Newest / Oldest
Katya_ABRP
Status changed to: Closed
Jose Antonio Garcia Fernandez
Yes, I have tried several ways. I have set for everything to update automatically. I have removed the baseline consumption update. I have removed the automatic update of the SOC. I have done all possible combinations and the result is always the same. In certain circumstances (which I don't know) it seems that it doesn't receive the data from the ODB and in the absence of data, it uses the data it has stored in its own configuration.
I repeat that with the CarScanner application the data exchange is totally correct and fluid, always updating in real time, so the OBD works correctly.
In response to your initial comment, is it possible that using Android Auto the problem could be corrected? I don't mind buying a month of premium access to try it out, if you consider it appropriate.
Translated with www.DeepL.com/Translator (free version)
Jose Antonio Garcia Fernandez
Hello, thank you very much for replying. It is very nice to know that they listen to you and are interested.
The OBD dongle works correctly because with the CarScanner application it works perfectly and totally stable.
With ABRP it establishes the connection (the 3 steps) but when I tell it to plan a route SOMETIMES it starts the route with the correct SOC (reads the OBD well) and starts driving correctly but after a while the SOC stays still for a while and then it shows the output SOC that ABRP has in its initial configuration (which of course does not match the real SOC).
Other times (most of the times) even if the OBD is correctly connected, when starting a route instead of displaying the real SOC (read by the OBD), it displays the output SOC that is in the ABRP configuration.
The application has all the permissions in Android, it is configured so that the battery saving does not affect it and the mobile screen is configured so that it does not turn off.
Thank you very much. The app is fantastic and I would love to purchase the paid version, but first I need to make sure it works for me.
Samuel_ABRP
Thanks for your feedback, so you use the app only, no Android Auto.
Did you make sure to always enable the automatic mode, or at least the blue button in front of the SoC and reference consumption?
Samuel_ABRP
Status changed to: User Feedback
Samuel_ABRP
Hi,
what values do you see that are not what the car reports? I use a PSA car myself and never saw a wrong value, so the OBD commands are definitely correct and working. This could be either due to a faulty OBD dongle or a lost connection.
So does the value only differ by a few percent, or is it completely off? Please provide some samples.
Dennis Hall
I am having a similar issue. The connection seems to be working, but ABRP will diverge more and more over time from battery charge values reported by the car.
I’m in a 2021 Ford Mustang Mach-e
Samuel_ABRP
Please open your own issue, as you have a different car, it might not be the same issue. However as you say it diverges over time my assumption is, that you get an initial value maybe, and then no values again after that and it just shows the values from planning. As said please open your own issue for that so it is easier to keep track.