Current SOC and end of trip SOC flip between different values
- Done
|
S |
Stefan Bäckman |
I am using live data from my OBD-2 adapter in my Skoda Enyaq. I also have the car connected via Tronity. When using ABRP the SOC value is switching between two different values. The same goes during a planned trip. Both the current SOC and the arriving SOC will change values. The values are still quite close to the car reported SOC.
I also notice that my position is sketchy when I look at "My Driving data" (min kördata). See attached picture. During this day I had some trips in Lidköping and then home to Täby. The gps is working when driving.
I recently upgraded my Enyaq to the latest 3.0 software. Before that I did not see this problem. Don't think that should make any difference but you never know.
This video on my Google Photo shows the behavior. photos.app.goo.gl/RgTqZpWDhSu4WQTP9
Activity Newest / Oldest
Bo_ABRP
Status changed to: Done
Bo_ABRP
Thank you - this has now been fixed and is available in build 1133 which should be automatically installed for you (force kill the app to get it immediately).
Stefan Bäckman
Thx, both problems? I will test as soon as the update is available. Update not yet in play store.
Stefan Bäckman
Had the update this morning. Switching between different SOC seems to be gone. Good. But the SOC differs from SOC reported in display of car. I had 18% in ABRP and 20% in car display SOC. Google photo video: photos.app.goo.gl/RawunusUrqtUNCS16
Samuel_ABRP
That is because we do not get the exact display soc for VW (MEB in general) cars, so we have to guess it based on BMS soc, so it is always a slightly bit off. If you know the OBD commands for display SoC or can find them anywhere let us know. You can find the OBD commands for MEB we use here:
github.com/iternio/ev-obd-pids/blob/main/volkswagen/MEB.json
Stefan Bäckman
Maybe I should add that I cleared cache and data for the app and logged in again. Same issue after.