|
Eric De Bruycler |
When the charging speed appears for the 300kw terminal, for example, when planning the route, the charging time is calculated on the basis of 0.3kw. A 15 minute stop becomes a 20 hour stop. Unable to use the route planner under these conditions. For me it's the bug too much, with each update there is something that no longer works, so I stop my subscription since I pay for nothing. You'd better find developers up to the task, because everyone is going to leak your subscription.
Original
----------------------
Lorsque la vitesse de charge apparaît pour la borne 300kw par exemple, lors de la planification de l'itinéraire le calcul de temps de charge se fait sur base de 0,3kw. Un arrêt de 15 minutes devient un arrêt de 20 heures. Impossible d'utiliser le planificateur d'itinéraire dans ces conditions. Pour moi c'est le bugg de trop, à chaque maj il y a quelque chose qui ne fonctionne plus, donc j'arrête mon abonnement puisque je paye pour rien. Vous feriez bien de trouver des développeurs à la hauteur, car tout le monde va fuir votre abonnement.
Activity Newest / Oldest
Katya_ABRP
Status changed to: Closed
Eric De Bruycler
abetterrouteplanner.com?plan_uuid=7a423e59-ed0d-48f6-9214-c29a471f80ce
Katya_ABRP
The charging rate has been manually edited in this plan, we do not calculate with 0,4 kW by default. If the waypoint settings are reset, we get this plan instead: abetterrouteplanner.com/?plan_uuid=1bf262ff-3849-4634-8c5f-8c69947b14ff
Katya_ABRP
Status changed to: User Feedback
Katya_ABRP
Hi Eric,
This is not something we've had reported to us or seen before. Could you please provide a link to the plan where this occurs so that we may investigate it?
It is thinkable that there could be a charger with incorrect data, but if the speed is this slow it would have to be manually included in the plan else we would never pick it.
/Katya