I would like to have this model added into ABRP as I have this scooter as well.
Katya_ABRP
Hi Jose,
Thank you for the suggestion!
To help us build the model, would you please also provide as much of the following information as you can find online (Ordered from most to least important):
Usable Battery Capacity
Range (WLTP is preferred)
Weight
Dimensions (Height, Width, Length)
Coefficient of Drag
Coefficient of Rolling Resistance
We can build a model based on only a partial set of these, but the more data you can provide the better the model will be. For charging, at least some of the following data is needed:
Peak Charge Power
Charge Time (including start/end %)
Plot of Power vs SoC %
A video of a charging session from low to high SoC would also work quite well.
/Katya
JOSE FRANCISCO RIVERA
NIU NQI GT PRO OR EXTENDED RANGE
Usable Battery Capacity Total capacity 35Ah 60VOLTS 2.1 kWH PER BATTERY This model is the DUAL Battery
Total 4.100 kWa
Standard charging current Input 100-240VAC 12.0A MAX
OUTPUT 35-84VDC 12.0 MAX
Dimensions
Front Tyre 90/90-14
Rear Tyre 110/80-14
Seat Height 815mm
Wheelbase 1325 mm
LxWxH 1890 x 740 x 1223
Ground Clearance 180mm
Wade Depth 230mm
Maximum user weight: 269 kg
Vehicle weight: 113 kg
Peak Charge Power In my observation I think is constant flat charging
Charge Time (including start/end %) Usually from 40% to 100% takes 4 hrs to 5 hrs
Plot of Power vs SoC % >NO IFORMATIOON FOUND
JOSE FRANCISCO RIVERA
Peak Charge Power In my observation I think is constant flat charging 12.0 Amps
Charge Time (including start/end %) Usually from 40% to 100% takes 4 hrs to 5 hrs
From my observation during a charging session: 19.5% charged in 1 hour, 39% in 2 hours
JOSE FRANCISCO RIVERA
Electric scooter 4.1 kw battery 2 batteries 60 volts 35 Ah each 3100 watt motor range 80 Km, 100Km and 120Km in 3 modes
Activity Newest / Oldest
Katya_ABRP
Status changed to: User feedback
Javier Rojas
I would like to have this model added into ABRP as I have this scooter as well.
Katya_ABRP
Hi Jose,
Thank you for the suggestion!
To help us build the model, would you please also provide as much of the following information as you can find online (Ordered from most to least important):
Usable Battery Capacity
Range (WLTP is preferred)
Weight
Dimensions (Height, Width, Length)
Coefficient of Drag
Coefficient of Rolling Resistance
We can build a model based on only a partial set of these, but the more data you can provide the better the model will be. For charging, at least some of the following data is needed:
Peak Charge Power
Charge Time (including start/end %)
Plot of Power vs SoC %
A video of a charging session from low to high SoC would also work quite well.
/Katya
JOSE FRANCISCO RIVERA
NIU NQI GT PRO OR EXTENDED RANGE
Usable Battery Capacity Total capacity 35Ah 60VOLTS 2.1 kWH PER BATTERY This model is the DUAL Battery
Total 4.100 kWa
Standard charging current Input 100-240VAC 12.0A MAX
OUTPUT 35-84VDC 12.0 MAX
Dimensions
Front Tyre 90/90-14
Rear Tyre 110/80-14
Seat Height 815mm
Wheelbase 1325 mm
LxWxH 1890 x 740 x 1223
Ground Clearance 180mm
Wade Depth 230mm
Maximum user weight: 269 kg
Vehicle weight: 113 kg
Peak Charge Power In my observation I think is constant flat charging
Charge Time (including start/end %) Usually from 40% to 100% takes 4 hrs to 5 hrs
Plot of Power vs SoC % >NO IFORMATIOON FOUND
JOSE FRANCISCO RIVERA
Peak Charge Power In my observation I think is constant flat charging 12.0 Amps
Charge Time (including start/end %) Usually from 40% to 100% takes 4 hrs to 5 hrs
From my observation during a charging session: 19.5% charged in 1 hour, 39% in 2 hours
JOSE FRANCISCO RIVERA
Electric scooter 4.1 kw battery 2 batteries 60 volts 35 Ah each 3100 watt motor range 80 Km, 100Km and 120Km in 3 modes