To help us build the model, would you please also provide as much of the following information as you can find online (Ordered from most to least important):
- Usable Battery Capacity
- Range (WLTP is preferred)
- Weight
- Dimensions (Height, Width, Length)
- Coefficient of Drag
- Coefficient of Rolling Resistance
We can build a model based on only a partial set of these, but the more data you can provide the better the model will be. For charging, at least some of the following data is needed:
- Peak Charge Power
- Charge Time (including start/end %)
- Plot of Power vs SoC %
A video of a charging session from low to high SoC would also work quite well.
Activity Newest / Oldest
Laureano Rojas
Hello, attach spec for EX1 EV, just commet that the conector is GBT.
Thanks.
Reference:
www.dfm-global.com/pd.jsp?id=305
Katya_ABRP
Status changed to: User feedback
Katya_ABRP
Hi Laureano,
Thank you for the suggestion!
To help us build the model, would you please also provide as much of the following information as you can find online (Ordered from most to least important):
- Usable Battery Capacity
- Range (WLTP is preferred)
- Weight
- Dimensions (Height, Width, Length)
- Coefficient of Drag
- Coefficient of Rolling Resistance
We can build a model based on only a partial set of these, but the more data you can provide the better the model will be. For charging, at least some of the following data is needed:
- Peak Charge Power
- Charge Time (including start/end %)
- Plot of Power vs SoC %
A video of a charging session from low to high SoC would also work quite well.
/Katya