Usable Battery Capacity: 75,254kWh usable (calculated based on full pack = 78.8kWh - 4,5% usual Tesla safety buffer hidden below 0% SOC)
Range (WLTP is preferred): 565km WLTP (with standard 19" tyres)
Weight: 2054kg
Dimensions (Height, Width, Length): L475cm X W212.9cm X H162.4 cm
Coefficient of Drag: 0.23cd
Coefficient of Rolling Resistance: 0.01
To help us build the model, would you please also provide as much of the following information as you can find online (Ordered from most to least important):
Usable Battery Capacity
Range (WLTP is preferred)
Weight
Dimensions (Height, Width, Length)
Coefficient of Drag
Coefficient of Rolling Resistance
We can build a model based on only a partial set of these, but the more data you can provide the better the model will be. For charging, at least some of the following data is needed:
Peak Charge Power
Charge Time (including start/end %)
Plot of Power vs SoC %
A video of a charging session from low to high SoC would also work quite well.
Activity Newest / Oldest
Johan Hellmark
Status changed to: Live
Katya_ABRP
Status changed to: In progress
Yann Robbe
Katya_ABRP
Merged with: Tesla Model Y long range 2022
Hans Calmfors
Hey! Here are the numbers we know so far (mostly based on tff-forum.de/t/wiki-model-3-model-y-batteriewiki-akkuwiki/107641):
Usable Battery Capacity: 75,254kWh usable (calculated based on full pack = 78.8kWh - 4,5% usual Tesla safety buffer hidden below 0% SOC)
Range (WLTP is preferred): 565km WLTP (with standard 19" tyres)
Weight: 2054kg
Dimensions (Height, Width, Length): L475cm X W212.9cm X H162.4 cm
Coefficient of Drag: 0.23cd
Coefficient of Rolling Resistance: 0.01
Charging curves available here:
tff-forum.de/t/wiki-model-3-model-y-batteriewiki-akkuwiki/107641/1811
Katya_ABRP
Hi Autumn,
Thank you for the suggestion!
To help us build the model, would you please also provide as much of the following information as you can find online (Ordered from most to least important):
Usable Battery Capacity
Range (WLTP is preferred)
Weight
Dimensions (Height, Width, Length)
Coefficient of Drag
Coefficient of Rolling Resistance
We can build a model based on only a partial set of these, but the more data you can provide the better the model will be. For charging, at least some of the following data is needed:
Peak Charge Power
Charge Time (including start/end %)
Plot of Power vs SoC %
A video of a charging session from low to high SoC would also work quite well.
/Katya